Multi-Rail Rubber End Cap (Spoiler) - Campervan Conversion - UK
- self-adhesive spoiler profile
- suitable for Multirail rails
- drains rainwater at the front and rear
- Easy assembly due to pre-formed spoiler profiles
- Consisting of a front spoiler, rear locking, instruction and stainless steel screws
Supplied for self-fitting.
It is very easy to fit as the rubber has M3 tape on, meaning you just need to decide where you want it located. then just simply seal with clear sealant when happy.
To obtain optimum adhesion, the bonding surfaces must be well unified, clean and dry. Prep the surface with an alcohol cleaning wipe for better adhesion.
Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure develops better adhesive contact and helps improve bond strength. Generally, this means that the tape should experience at least 15 psi (100kPa) in a roll down or platen pressure.
After application, the bond strength will increase as the adhesive flows onto the surface. At room temperature, approximately 50% of the ultimate strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. In some cases, bond strength can be increased and ultimate bond strength can be achieved more quickly by exposure of the bond to elevated temperatures (e.g. 150°F [66°C] for 1 hour)